Bedec Barn Paint - Semi Gloss
Please sign in so that we can notify you about a reply
PROTECT, RECOLOUR AND EXTEND THE LIFESPAN OF YOUR EXTERIOR BUILDINGS.
PLEASE NOTE: 20L BEDEC BARN PAINT WILL USUALLY TAKE 2-3 DAYS FOR DELIVERY.
Bedec Barn Paint uses revolutionary, water-based technology. Tough, durable and outstanding colour retention. The paint will flex with the substrate rather than crack or flake, ensuring you the ultimate protection.
Perfect for the protection of exterior buildings made from wooden, metal and plastic cladded substrates.
IDEAL FOR
- Fencing
- Posts
- Guttering
- Weathered Galvanising
- Barns
- Horse Stables
- Gates
- Farm Equipment
- Outbuildings
- Tanks
- Drainpipes
- Doors
- Windows
- Garden Sheds
- Water Silos
- Cladded Industrial and Factory Units
- Wooden, Corrugated Metal and Metal Box Cladding
FEATURES
- Resistant against cracking, blistering and flaking
- Resistant to weather and prevents algae build-up and Rot
- Easy to apply
- Long lasting colour retention
- Can be used on multiple surface applications
- Available in semi-transparent, matt, gloss and semi gloss finish
- Self-priming (unless applying to bare steel or rusty surfaces. Please prime with Bedec All Metals Primer first.)
- Paint on your pre-painted surfaces (even those coated with weathered bitumen, tar or creosote).
TECHNICAL INFORMATION
| Brand | Bedec |
|---|---|
| Coverage | 13–15m² per litre (depending on substrate and porosity) |
| Application | Brush, Roller, Airless Spray, HVLP Spray |
| Drying Time | Touch dry in 2–4 hours; dry to recoat in 4 hours @ 23°C |
| Coats | 2 coats |
| Cleanup | Clean directly after using water |
| Storage | 2 years if can kept dry and firmly shut, away from direct sunlight |
| VOC | 60g/l |
| Material | Water-based acrylic |
| MPN | AK0002, AK0003, AK0083, AK0095, AK1200, AK1296, AK1487, AK1873, AK1880, AK2007, AK2008, AK2009, AK2010, AK2011, AK2013, AK2014, AK2015, AKB001, AKE004, AKH003, AN0002, AN0003, AV0002, AV0003 |
USEFUL DOCUMENTS
See Attachments
PREPARATION
Carry out any structural repairs prior to application. The substrate must be sound, dry and free from oil and grease:
- Carry out cleaning with a liqiud detergent solution rinsed with clean water.
- Allow to dry.
- Brush clean surfaces contaminated with lichen or moss.
- Treat with an Anti-Fungal and wash until clean.
- Allow to dry.
Please note:
- Plastic, metal, timber and smooth surfaces should be rubbed down with abrasive paper or equivalent.
- Prime bare steel and rust with Bedec All Metal Primer after appropriate preparation.
- Treat stains with a Stain Block prior to painting.
- Allow new creosote (3 weeks) and galvanised (1 month) to 'weather' before painting.
HOW TO APPLY BEDEC BARN PAINT
Apply by Brush, Roller or Conventional/Airless Spray.
No primer or undercoat is necessary unless used on ferrous metal (mild steel) or where staining could occur.
For porous substrates, thin the first coat with 30% water (this will act as a self-primer). Do not apply at temperatures below 8ºC. Avoid applying in foggy conditions, or if rain looks likely. Use two full coats for most effective and aesthetic protection.
Coverage:
Approximately 12–14 m²/litre when applied by Brush or Roller (dependent on texture and porosity of substrate).
Please note that Airless Spraying will considerably reduce this to 6–8 m²/litre.
AFTERCARE
Touch dry in approximately 2 hours, normally re-coatable after 4 hours at 18°C and 65% RH. Optimum hardness is reached after 2 weeks. Ensure good ventilation during application and drying.
Clean up: Warm soapy water.
PRODUCT NUMBERS
Manufacturer's Part Numbers (MPN): AK0002, AK0003, AK0083, AK0095, AK1200, AK1296, AK1487, AK1873, AK1880, AK2007, AK2008, AK2009, AK2010, AK2011, AK2013, AK2014, AK2015, AKB001, AKE004, AKH003, AN0002, AN0003, AV0002, AV0003
