Please sign in so that we can notify you about a reply
SAS strength retainer is designed to provide a permanent bond between closely fitting parts.
It will retain its full strength and not suffer fatigue under load stress. It is suited to structural components such as cylindrical parts under dynamic load keys splines and structural tubing with close tolerance fit.
Top Tip: Surface keying action is greatly increased by a rough surface finish giving higher shear strength. Ideal roughness is between 10 120 microns with a preferred tolerance of between 30 100 microns. Larger gaps over 175 microns can result in ultimate strength loss.
Technical Specifications:
- Resin: Urethane Acrylate
- Colour: Green
- Fixture speed (No Activator): 5 mins
- Viscosity: 2500 cps
- Gap fill: 0.2 mm
- Flash point: >85°C
- Specific gravity: 1.08
- Max operating temperature: 55°C to + 150°C
- Full cure time: 24 hours
- Static shear strength: 30 N/mm²