Bourgault Adaptor
Bourgault Speed-Loc™ Adapters
Fits Many Brands
Speed-Loc™ Adapters fit a variety of machines and make it easy to change between BTT openers, fertilizer knives, sweeps and spikes.
Consistent Depth Control
The upper stop on the adapter ensures tillage or seeding tools are always running at the same depth.
Peace of Mind
Heat-treated cast adapters provide increased strength and wear resistance. The spring-loaded locking pin ensures the tools will stay securely in place in all conditions, and we back that up with a 100% guarantee.
Not Sure What Speed-Loc™ Adapters Fits your Machine?
Find your equipment and the adapter that’s required on the Speed-Loc™ Adapter Chart.
Assembly, Installation & Removal Questions?
See the Speed-Loc™ Guide or videos for expert advice on the quick change system.
Removing Products from the Speed-Loc™ Adapters?
Remember to use the Speed-Loc™ Release Tool to remove openers, sweeps and spikes from the adapters.
Need Replacement Parts or a Sprred-Loc™ Driver?
Find the right Speed-Loc™ Accessories to install, remove and maintain the quick change system.
200 SERIES SPEED-LOC™ ADAPTERS
200-QCA-4700
Fits: 47° Shanks, Bourgault and Ezee-On field cultivators, air seeders and air drills.
Bolt Hole Spacing: 1-3/4” (45mm) center to center
Bolts: 1/2” (12mm) Hex Head Bolts
200-QCA-4710
Fits: 47° Shanks, except Bourgault and Ezee-On
Bolt Hole Spacing: 1-3/4” (45mm) center to center
Bolts: For 7/16” (11mm) shank holes use oversized head plow bolts. For 1/2” (12mm) shank holes use regular plow bolts.
200-QCA-5000
Fits: 50° Shanks, Bourgault and Morris Concept 2000.
Bolt Hole Spacing: 2-1/4” (57mm) center to center
Bolts: 1/2” (12mm) Hex Head Bolts
Notes: Not recommended for primary tillage, use only for seeding.
200-QCA-5010
Fits: 50° Shanks, except Bourgault Chisel Plows, can be used on a 43° shank with the addition of a 7° wedge (100-WDG-0700).
Bolt Hole Spacing: 2-1/4” (57mm) center to center
Bolts: 1/2” (12mm) Plow Bolts
Notes: Not recommended for deep, heavy tillage.
200-QCA-5020
Fits: European built shanks
Bolt Hole Spacing: 63-80 mm center to center
Bolts: M12-Din608 10.9 Plow Bolts
200-QCA-5030
Fits: Horsch Shanks
Bolt Hole Spacing: 57mm center to center
Bolts: M12-Din608 10.9 Plow Bolts
410 SERIES SPEED-LOC™ ADAPTERS
410-QCA-5000
Fits: 50° Shanks on Bourgault chisel plows and Morris Concept 2000with 755 lb trip.
Bolt Hole Spacing: 2-1/4″ (57mm) center to center
Notes: On a Bourgault four-hole shank, the center hole of the adapter should be plugged to protect the spring ball from NH3 gases when used as a NH3 applicator. When installing 410 Series Speed-Loc™ Adapters for use with NH3, fill the hole behind the spring ball with plumber’s putty to protect from degradation caused by NH3.
410-QCA-5010
Fits: 50° Shanks on all chisel plows except Bourgault, Morris Concept 2000 with 755 lb trip and some John Deere models. Can be used on a 43° shank with the addition of a 7° wedge (400-WDG-0700)
Bolt Hole Spacing: 1-3/4″ to 3″ (45-76mm) center to center slotted bolt hole spacing providing the ability to fit many different makes and models.
Notes: In rocky or abrasive conditions, the bottom nut may experience excessive wear or damage. This problem is alleviated by placing the bottom bolt in from the back of the shank and putting the nut inside the slot in front of the adapter.
410-QCA-5020
Fits: Lemken shanks
Bolt Hole Spacing: 1-3/4″ (45mm) center to center
Bolts: M12-DIN608 10.9 plow bolts
410-QCA-5060
Fits: Köckerling
Bolt Hole Spacing: N/A
Bolts: M12-DIN 608 12.9 plow bolts
410-QCA-5080
Fits: 50° Shanks on some older and current model John Deere 2410 and 2430 chisels plows, and Summers Superchisel
Bolt Hole Spacing: 2-1/4” (57mm) center to center
Bolts: For John Deere 1-1/4” shank use 1/2” x 3” Grade 8 Hex Head bolt prevailing torque lock nuts.
Notes: Bushing 880-BSH-2000 is required for installation on all John Deere shanks having the split bottom bolt hole (https://www.marketplace.farm/farm-machinery-parts-and-spares/tillage-machinery-parts/bourgault-tillage-tools/accessories/). Also required for Summers chisel ploughs.
