Farm Machinery

Niaux 200 Discs - 380mm x 4mm Pilot Hole Size 76mm

ACCORD Replaces OEM Part #: AC825821 Disc Type: Flat Dimensions: 380mm x 4mm Pilot Hole Size: 76mm # of Bolt Holes: 6 x 8.5mm

Castrol VECTON® Long Drain 10W-30 E6/E9 is an advanced part synthetic heavy duty diesel engine oil that is
specifically engineered to deliver longer useful oil life.

Castrol Transmax Agri MP 15W-30 (previously Agri MP 15W-30) is a universal oil for most types of farm machinery.

Seed Boot QC Attachment Straight

300-ATM-1020 This straight attachment will spread the seed approximately 2-1/2″ (63mm). It works well with the quick change spoons, spikes or any size of sweep.

Spike .625" X 2" X 6" Hardened Wear Pad 

200-SPK-0200

Quick change spike is 5/8" thick by 2-1/4" wide by 6" long. This quick change spike has a hardened wear pad (52-56 HRC) for extra life.

Knife No Tube 75" Carbide 410TIP0803 8MM Holder - Single Shoot Opener

The more vertical approach of this opener reduces rock pulling.

Seed Boot QC Attachment 6" SPREAD

300-ATM-1006 This spreader attachment will distribute the seed evenly in a 6″ (152mm) row. Seed spread may vary depending on sweep size, soil type and fan speed. Works well for organic operations because of the wide seed spread.

Tip 2" QC Carbide Front & Bottom

CARBIDE TIP SPREAD 2” (51mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Tip 3" QC Carbide Front & Bottom (DALE)

CARBIDE SPREAD TIP 3” (76mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Spike  .625" X 2" X 6" With Extended Wear Pad

SPIKE Fits: 200 Series Speed-Loc™ Installation Driver: 400-DRV-1000 Size: 5/8″ (15mm) thick by 2-1/4″ (57mm) wide by 6″ (150mm) long. 

This quick change spike has a hardened wear pad (52-56 HRC) that extends to the top of the stem to prevent wear in abrasive soil or when working at greater depths. 

 The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

Holder For Versatile Opener System Tips

Fits: Horsch 84° shank Use the bottom two holes when installing this holder for standard installation. To add 4° more pitch, use the top two holes on the holder.

4" Tip Single Shoot Paired Row 3/4" Drainage Trench

CARBIDE TIP 4” (102mm) cast tip with carbide insert on the nose for excellent penetration and wear resistance.

Spoon Opener .313"(8MM) X 2.25"(57MM)   - Blue Armour

These spoons have a 2” (51 mm) spread. Available in 1/4” (6 mm) material (200-SPN-0200) or 5/16” (8 mm) material for increased wear life (200-SPN-0208).

Castrol VECTON® Long Drain 10W-30 E6/E9 is an advanced part synthetic heavy duty diesel engine oil that is
specifically engineered to deliver longer useful oil life.

Wedge Urethane 2 Degree Decrease Pitch

200-WDG-0206 This 2° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.

Spring Ball For Speed-LOC 200-QCA-5030

200-SLC-1039

Replacement spring ball for 200-QCA-5030 adapters.

Bolt & Nut Combo 300BLT4414 & 600NUT3754

300-BNC-4414 This bolt and nut secure the quick change seed boot attachments into the holders.

New Castrol CRB Turbomax 10W-40 E4/E7 is an advanced heavy duty diesel engine oil. It is suitable for use in highlyrated diesel engines meeting Euro I to Euro V emission requirements. It is suitable for engines without particulate filters,for some EGR engines and some engines fitted with SCR NOx reduction systems.

Wedge Urethane 10 Degree Decrease Pitch

200-WDG-1006 This 10° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.

Spoon Opener .313"(8MM) X 3"(76MM)   - Blue Armour (Clay)

These spoons have a 2″ (51 mm) or 3″ (76 mm) spread. Available in 1/4″ (6 mm) material (200-SPN-0300) or 5/16″ (8 mm) material (200-SPN-0308) for increased wear life.

QC Tip (Versatile Opener System) 4" Paired row - Fits Versatile Opener System Style Holder - Extra Carbide

4″ Paired Row Tip with ¾” Horizontal and ¾” Vertical Seed/Fertilizer Separation. Extra long carbide on the nose and narrow carbide on the cutting edges of the wings for excellent penetration.

Horsch Granular Paired Row Holder

Hard facing is placed on critical wear points. The streamlined holder design reduces plugging and allows for better trash clearance

Knife No Tube.75" Carbide 410TIP0801 8MM Holder - Single Shoot Opener

This low disturbance opener is low in draft and provides easy pulling

.75" Tip, Fits VOS (Versatile Opener System) Style Holders

SINGLE SHOOT TIP Overview: 3/4” (19 mm) long-wearing single shoot tip with long carbide insert on the nose for highly abrasive conditions. Packer Recommendation: 3/4” (19 mm) or wider. Fertilizer Options: Used for seeding only.