Farm Machinery

Adapter (Euro) 50 Deg 65-80MM C-C Speed-LOC

Speed-Loc™ Adapters fit a variety of machines and make it easy to change between BTT openers, fertilizer knives, sweeps and spikes.

Adapter 50 Deg 57MM C-C Speed-LOC Horsch

Speed-Loc™ Adapters fit a variety of machines and make it easy to change between BTT openers, fertilizer knives, sweeps and spikes.

Release Tool 10 Deg Striker Fits All

200-REL-1010 The speed-release tool must be used to remove 200 and 410 Series sweeps and openers off the Speed-Loc™ adapters.

Dust Seal All Speed-LOC Adapters 200 & 410

200-SLC-1010 Replacement dust seal for all 200 and 410 Series Speed-Loc™ adapters.

Lock Pin For Speed-LOC 200 Series Adapters

Replacement locking pin for all 200 and 410 Series adapters purchased after Nov 1, 2008.

Spring Ball For Speed-LOC 200QCA4700

200-SLC-1030

Replacement spring ball for the 200-QCA-4700 adapters.

Spring Ball For Speed-LOC 200QCA4710&5010

200-SLC-1035

Replacement spring ball for the 200-QCA-4710, 200-QCA-5000 and 200-QCA-5010 adapters.

Spring Ball For 200-QCA-5020 & 410-QCA-5050 

200-SLC-1037

Replacement spring ball for the 200-QCA-5020 adapter.

Spring Ball For 200-QCA-5020 Special (17.55MM)

200-SLC-1038

Replacement spring ball for 200-QCA-5020 adapter for special applications.

Spring Ball For Speed-LOC 200-QCA-5030

200-SLC-1039

Replacement spring ball for 200-QCA-5030 adapters.

Spike .625" X 2" X 6" Hardened Wear Pad 

200-SPK-0200

Quick change spike is 5/8" thick by 2-1/4" wide by 6" long. This quick change spike has a hardened wear pad (52-56 HRC) for extra life.

Spike  .625" X 2" X 6" With Extended Wear Pad

SPIKE Fits: 200 Series Speed-Loc™ Installation Driver: 400-DRV-1000 Size: 5/8″ (15mm) thick by 2-1/4″ (57mm) wide by 6″ (150mm) long. 

This quick change spike has a hardened wear pad (52-56 HRC) that extends to the top of the stem to prevent wear in abrasive soil or when working at greater depths. 

 The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

Spoon Opener .313"(8MM) X 2.25"(57MM)   - Blue Armour

These spoons have a 2” (51 mm) spread. Available in 1/4” (6 mm) material (200-SPN-0200) or 5/16” (8 mm) material for increased wear life (200-SPN-0208).

Spoon Opener .313"(8MM) X 3"(76MM)   - Blue Armour (Clay)

These spoons have a 2″ (51 mm) or 3″ (76 mm) spread. Available in 1/4″ (6 mm) material (200-SPN-0300) or 5/16″ (8 mm) material (200-SPN-0308) for increased wear life.

Tip .75" QC Long Nose Carbide

tip with extra long carbide on the nose for highly abrasive conditions.

Tip 2" QC Carbide Front & Bottom

CARBIDE TIP SPREAD 2” (51mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Tip 3" QC Carbide Front & Bottom (DALE)

CARBIDE SPREAD TIP 3” (76mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Wedge Urethane 2 Degree Decrease Pitch

200-WDG-0206 This 2° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.

Wedge Urethane 5 Degree Decrease Pitch

200-WDG-0506 This 5° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks

Wedge Urethane 10 Degree Decrease Pitch

200-WDG-1006 This 10° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.

Seed Boot QC Attachment 6" SPREAD

300-ATM-1006 This spreader attachment will distribute the seed evenly in a 6″ (152mm) row. Seed spread may vary depending on sweep size, soil type and fan speed. Works well for organic operations because of the wide seed spread.

Seed Boot QC Attachment Straight

300-ATM-1020 This straight attachment will spread the seed approximately 2-1/2″ (63mm). It works well with the quick change spoons, spikes or any size of sweep.

Bolt & Nut Combo 300BLT4414 & 600NUT3754

300-BNC-4414 This bolt and nut secure the quick change seed boot attachments into the holders.

Seed boot holder 43&50 Degree Curved Shank  

300-HLD-5010 Fits: Any chisel plow shank except the Bourgault and the Morris LH755 shank Overview: 2-1/4″ (57mm) bolt hole spacing. The bolt hole section is curved. Notes: Use a hose clamp to secure the air hose into the seed boot holder.