Farm Machinery

Sweep .313"(8MM)X 4"(100MM) W/ Hardened Wear Pad

This sweep is designed mainly for fall tillage or deep working. It has a 3/8″ x 2″ hardened wear pad (52-56 HRC) which increases wear life.

Sweep .313"(8MM) X 5.5"(140MM)   - Blue Armour

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Sweep .313"(8MM) X 11"(280MM)   - Blue Armour

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Adapter (Euro) 50 Deg 65-80MM C-C Speed-LOC

Speed-Loc™ Adapters fit a variety of machines and make it easy to change between BTT openers, fertilizer knives, sweeps and spikes.

Adapter SPD-LOC Flat  47 DEG 1.75" C-C     2045-79

Speed-Loc™ Adapters fit a variety of machines and make it easy to change between BTT openers, fertilizer knives, sweeps and spikes.

Sweep .313"(8MM) X 10"(255MM)   - Blue Armour

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Sweep .313"(8MM) X 13"(330MM)   - Blue armour (KEV)

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Sweep .313"(8MM) X 14"(355MM)   - Blue Armour

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Sweep .313"(8MM) X 12"(305MM)   - Blue Armour

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Wedge Urethane 5 Degree Decrease Pitch

200-WDG-0506 This 5° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks

Sweep .313"(8MM) X 16"(420MM)   - Blue Armour

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Sweep .313"(8MM)X 5.5"(140MM) W/ Hardened Wear Pad

• Precise Heat Treatment   • Long-Lasting Design   • Consistent Quality   • Innovative Speed-Loc™ Technology

Sweep .313"(8MM)X 5.5"(140MM) W/ Extd Wear Pad

This sweep is designed mainly for fall tillage or deep working. It has a 2″ hardened wear pad (52-56 HRC) which increases wear life.

Sweep .313"(8MM) X 9"(230MM) V-Wing 9.5MM With Hardened Wear Pad

The sweep has a 3/8″ x 2″ hardened wear pad (52-56 HRC) that extends up the entire stem which increases its wear life.

Release Tool 10 Deg Striker Fits All

200-REL-1010 The speed-release tool must be used to remove 200 and 410 Series sweeps and openers off the Speed-Loc™ adapters.

Castrol Transmax Agri Trans Plus 80W can be used in hydraulic, transmission and PTO of tractors and off-highway
equipment. It gives high levels of wear prevention from start up and throughout the operative period with enhanced
corrosion protection properties.

050-KNH-0812 for C-Shank

SINGLE SHOOT OPENER - Starter Fertilizer w/ Seed Only

Shell Rimula R4 L is formulated with reduced levels of ash and sulphur to help maintain the efficiency of the latest and future vehicle technologies.

C-Shank Holder For VOS - Versatile Opener System

This holder is part of the VOS (Versatile Opener System) which gives you the flexibility to choose the right tip and fertilizer tubes for your needs. Photo on the left is shown with 610-TIP-4081 and 880-TUB-1003. Components and tips sold separately

Holder For Single shoot, (Tip Sold Seperately)

A narrow design allows for more accurate seed placement behind the tip. Extra hard surfacing on critical wear areas increases the life of the holder.

Adapter 50 Deg 57MM C-C Speed-LOC Horsch

Speed-Loc™ Adapters fit a variety of machines and make it easy to change between BTT openers, fertilizer knives, sweeps and spikes.

.75" Tip, Fits VOS (Versatile Opener System) Style Holders

SINGLE SHOOT TIP Overview: 3/4” (19 mm) long-wearing single shoot tip with long carbide insert on the nose for highly abrasive conditions. Packer Recommendation: 3/4” (19 mm) or wider. Fertilizer Options: Used for seeding only.

Knife No Tube.75" Carbide 410TIP0801 8MM Holder - Single Shoot Opener

This low disturbance opener is low in draft and provides easy pulling

Adapter Speed-LOC Curved 50Deg 2.25"(57MM)C-C  (KEV)

Speed-Loc™ Adapters fit a variety of machines and make it easy to change between BTT openers, fertilizer knives, sweeps and spikes.