Farm Machinery

Seed Boot QC Attachment Straight

300-ATM-1020 This straight attachment will spread the seed approximately 2-1/2″ (63mm). It works well with the quick change spoons, spikes or any size of sweep.

Seed Boot QC Attachment 6" SPREAD

300-ATM-1006 This spreader attachment will distribute the seed evenly in a 6″ (152mm) row. Seed spread may vary depending on sweep size, soil type and fan speed. Works well for organic operations because of the wide seed spread.

Wedge Urethane 10 Degree Decrease Pitch

200-WDG-1006 This 10° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.

Wedge Urethane 5 Degree Decrease Pitch

200-WDG-0506 This 5° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks

Wedge Urethane 2 Degree Decrease Pitch

200-WDG-0206 This 2° urethane wedge has 45-80mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.

Tip 3" QC Carbide Front & Bottom (DALE)

CARBIDE SPREAD TIP 3” (76mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Tip 2" QC Carbide Front & Bottom

CARBIDE TIP SPREAD 2” (51mm) tip with carbide insert on the nose to fracture the ground. Carbide inserts on the underside of the wings to maintain a sharp cutting edge.

Tip .75" QC Long Nose Carbide

tip with extra long carbide on the nose for highly abrasive conditions.

Spoon Opener .313"(8MM) X 3"(76MM)   - Blue Armour (Clay)

These spoons have a 2″ (51 mm) or 3″ (76 mm) spread. Available in 1/4″ (6 mm) material (200-SPN-0300) or 5/16″ (8 mm) material (200-SPN-0308) for increased wear life.

Spoon Opener .313"(8MM) X 2.25"(57MM)   - Blue Armour

These spoons have a 2” (51 mm) spread. Available in 1/4” (6 mm) material (200-SPN-0200) or 5/16” (8 mm) material for increased wear life (200-SPN-0208).

Spike  .625" X 2" X 6" With Extended Wear Pad

SPIKE Fits: 200 Series Speed-Loc™ Installation Driver: 400-DRV-1000 Size: 5/8″ (15mm) thick by 2-1/4″ (57mm) wide by 6″ (150mm) long. 

This quick change spike has a hardened wear pad (52-56 HRC) that extends to the top of the stem to prevent wear in abrasive soil or when working at greater depths. 

 The Speed Release tool (200-REL-1010) must be used when removing openers, sweeps, and spikes from the Speed-Loc™ Adapters.

Spike .625" X 2" X 6" Hardened Wear Pad 

200-SPK-0200

Quick change spike is 5/8" thick by 2-1/4" wide by 6" long. This quick change spike has a hardened wear pad (52-56 HRC) for extra life.