Hyspin- HV Hydraulic Oil AWH-M 46, 20ltr E4

Free UK Delivery to Commercial Address.

Forklift required to unload product, Items will be delivered by large articulated lorry

Description
The Castrol Hyspin™ AWH-M hydraulic oil range of shear stable high viscosity index lubricants are based on the latest
stabilised zinc additive technology.
Application
Hyspin AWH-M contains a shear stable additive system which helps maintain the viscosity characteristics of the product
over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product
to be used in very cold environments. It exhibits excellent corrosion and wear protection as well as outstanding thermal
and oxidative stability. In addition, Hyspin AWH-M has excellent hydrolytic stability and separates rapidly from water
contamination upon standing. Applications include:
Outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold
start up conditions and high temperature continuous running. Examples include off-highway and marine
applications.
Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with
temperature. Examples include precision machine tools.
The Hyspin AWH-M range is fully compatible with elastomer materials commonly used for static and dynamic
seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers.
Hyspin AWH-M is classified as follows:
DIN 51502 classification – HVLP
ISO 6743/4 - Hydraulic Oils Type HV
Hyspin AWH-M grades meet the requirements (for appropriate viscosity grade) of:
DIN 51524 Part 3
Cincinnati Lamb (Milacron) P 68-69-70
Denison (Parker Hannafin) HF-0
US Steel 126 & 127
Eaton (formerly Vickers) I-286-S & M-2950-SBosch Rexroth RE07075/RE90220
Advantages
High viscosity index and low pour point enables the product to be used over a wide temperature range, with good
shear stability which means no excessive loss in viscosity due to mechanical shearing.
Excellent anti-wear performance provides extended wear protection for hydraulic pumps. Reduced down time
due to unscheduled maintenance and savings from replacement part costs.
Excellent water separation and hydrolytic stability means reduced down time through prolonged lubricant life and
increased equipment reliability.
Good filterability gives a cleaner system with less frequent filter changes.

Typical Characteristics
Name Method Units AWH-M
15
AWH-M
32
AWH-M
46
AWH-M
68
AWH-M
100
AWH-M
150
ISO Viscosity Grade - - 15 32 46 68 100 150
Density @ 15°C / 59°F ISO 12185 /
ASTM D4052 kg/m³ 880 880 880 880 890 890
Kinematic Viscosity @ 40°C
/ 104°F
ISO 3104 / ASTM
D445 mm²/s 15 32 46 68 100 150
Kinematic Viscosity @
100°C / 212°F
ISO 3104 / ASTM
D445 mm²/s 3.83 6.41 8.32 11.09 13.45 18.01
Viscosity Index ISO 2909 / ASTM
D2270 - >150 >150 >150 >140 >130 >130
Pour Point ISO 3016 / ASTM
D97 °C/°F <-51/
<60 -45/-49 -42/-44 -36/-33 -30/-22 -30/-22
Flash Point - open cup
method
ISO 2592 / ASTM
D92 °C/°F 205/401 210/411 215/419 226/440 226/440 232/450
Flash Point - closed cup
method
ISO 2719 / ASTM
D93 °C/°F 160/320 200/392 220/428 220/428 220/428 220/428
Foam Sequence I - tendency
/ stability
ISO 6247 / ASTM
D892 ml/ml 20/0 20/0 20/0 20/0 20/0 20/0
Water Separation @ 54°C /
129°F (40/37/3)
ISO 6614 / ASTM
D1401 min 5 10 15 15 - -
Water Separation @ 82°C /
180°F (40/37/3)
ISO 6614 / ASTM
D1401 min - - - - 20 20
Air Release @ 50°C / 122°F ISO 9120 / ASTM
D3427 min 4 4 8 8 12 24
FZG Gear Scuffing test - A/
8.3/90 ISO 14635-1 Failure Load
Stage - 11 12 12 12 12
Rust test - distilled water (24
hrs)
ISO 7120 / ASTM
D665A - Pass Pass Pass Pass Pass Pass
Rust test - synthetic
seawater (24 hrs)
ISO 7120 / ASTM
D665B - Pass Pass Pass Pass Pass Pass
Shear Stability - KRL test
(4hrs) DIN 51350-6 viscosity loss
(%) - - 9.5 - - -
Subject to usual manufacturing tolerances.