Water Pump - Battery Only

POWERFUL EFFICIENT UP TO A HEIGHT OF 10M HEAD 

The battery pump has been developed in response to an increasing requirement to fence off water courses, in order to meet European clean water regulations. Fencing off water courses protects against river bank erosion, deters poaching and contributes to cleaner water by keeping livestock away. These kits enable easy, clean utilsation of existing water sources by pumping water directly to troughs and drinkers as it is required. It can also be used to transfer water from water butts and other forms of water storage to the field. The pump operates from a 12v battery which is housed within the control box (will take up to a 75amp/hr battery - please note battery not included) 

• Kit includes: 
• Control box 12V submersible pump with 30m lead (Max 4amp - 120watt) 30m 
• 1/2" (12.7mm) bore ID reinforced hose electronic float switch (x2 - one spare) 
• battery connection leads buoyancy float (optional use) 
• hose to tank fittings hole cutter, 
• jubilee clps, 
• tie wraps 
• Extra operational information: Head (metres) - Approx. Litres per hr 0 metres 320 1 metres 305 2 metres 300 3 metres 285 4 metres 275 5 metres 265 10 metres 210 The float is electronic - connect it on to a trough and so then when the float is lowered down by the water level it kicks the pump into action when it gets below a certain level. The number of animals drinking from the trough and how often they are drinking will determind the life of the battery. If your water source is more than 30m away from your trough it is possible to extend the hose. (Please note that if the pump is going to be in regular use then you may wish to consider the solar version of this pump instead since with the solar panel will trickle feed the battery and will extend its life between charges) .